Silver Soldering Simplified by Scott David Plumlee

Silver Soldering Simplified by Scott David Plumlee

Author:Scott David Plumlee [Plumlee, Scott David]
Language: eng
Format: epub
ISBN: 978-0-7704-3368-0
Publisher: Crown Publishing Group
Published: 2013-09-16T16:00:00+00:00


1 To make eight 16-gauge, 18mm ID rings (see Very Large Jump Rings), use the 17mm OD gas pipe mandrel (see Gas Pipe Wrapping Mandrel and Wrapping and Cutting Jump Rings). Combine two silver wires into a double wire with five sutures of clear tape equally spaced down the wire. Wrap a double loop beginning with a ¼-inch (6.4mm) tail around the bronze frame and position the ring’s joint within the double loop.

2 Position the double loop at 12 o’clock, with the remaining sutured wire traveling behind the frame down to 6 o’clock, bisecting the frame. Bend the wire up and over the frame, bringing the tail through the frame on the right-hand side of the bisecting wire.



Download



Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.